CJX2 runtuyan AC Contactor utamana dipaké dina sirkuit tina AC 50Hz atanapi 60Hz, dipeunteun tegangan nepi ka 690Vrated ayeuna nepi ka 95A, pikeun pamakéan jarak jauh nyambungkeun jeung megatkeun sirkuit, éta ogé bisa bedirectly digabungkeun jeung relay termal kana starter éléktromagnétik ngajaga. sirkuit nu bisa boga operasi overloaded, Contactor ogé bisa dilengkepan asesoris kayaning grup kontak tipe bantu block, kontak reureuh hawa, mékanisme interlock mékanis, jeung sajabana pikeun ngagabungkeun kana contactor tunda, contactor arah, sarta starter béntang-delta.Éta saluyu sareng standar IEC/EN60947-4-1
Kaayaan operasi normal sareng kaayaan instalasi
1. Suhu ambient: + 5 ° C ~ + 40 ° C, hawa rata dina 24h teu ngaleuwihan + 35 ° C;
2. Luhurna: teu ngaleuwihan 2000m.
3. Kaayaan atmosfir: nalika suhu pangluhurna + 40 ° C, kalembaban rélatif henteu ngaleuwihan 50%;Éta tiasa ngijinkeun kalembaban anu kawilang luhur nalika aya dina suhu anu kawilang rendah, contona, ngahontal 90% nalika dina +20 ° C, éta kedah diukur nalika aya kondensasi anu kajantenan kusabab variasi suhu.
4. Kelas polusi: 3.
5. Kategori instalasi: III.
6. posisi Instalasi: gradién tina beungeut ningkatna kana beungeut nangtung teu ngaleuwihan ± 5 °
7. Dampak sareng geter: produk kedah dipasang sareng dianggo di tempat-tempat tanpa goyang, dampak sareng geter.
Modél No.
Parameter téknik utama
Parameter téknik utama kontaktor pikeun ningali tabel 1
Modél | CJX2-09 | CJX2-12 | CJX2-18 | CJX2-25 | CJX2-32 | CJX2-40 | CJX2-50 | CJX2-65 | CJX2-80 | CJX2-95 | |||
Tegangan insulasi dipeunteun V | 690 | ||||||||||||
Kontak utama | Arus pemanasan konvensional (≤40°C) A | 20 | 20 | 32 | 40 | 50 | 60 | 80 | 80 | 125 | 125 | ||
Arus dipeunteun (A) nalika di 380V | AC-3 | 9 | 12 | 18 | 25 | 32 | 40 | 50 | 65 | 80 | 95 | ||
AC-4 | 4 | 5 | 7 | 10 | 13 | 16 | 20 | 25 | 32 | 45 | |||
Kakuatan controllable motor fase tunggal kW | 110V | 0.4 | 0.5 | 0.75 | 1.1 | 1.5 | 1.5 | 2.2 | 3.7 | - | - | ||
220V | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 3.7 | 5.5 | - | - | - | |||
Kakuatan motor kandang bajing tilu fase anu tiasa dikontrol kW (nalika AC-3) | 220V | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 25 | ||
380V | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | |||
440V | 4 | 5.5 | 7.5 | 11 | 15 | 22 | 30 | 37 | 45 | 45 | |||
660V | 5.5 | 7.5 | 9 | 15 | 18.5 | 30 | 33 | 37 | 45 | 45 | |||
AC-1 (≤40°C) A | 20 | 20 | 32 | 40 | 50 | 60 | 80 | 80 | 125 | 125 | |||
Nyambungkeun max.ayeuna A | 250 | 250 | 300 | 450 | 550 | 800 | 900 | 1000 | 1100 | 1200 | |||
Megatkeun max.ayeuna A | 440V | 250 | 250 | 300 | 450 | 550 | 800 | 900 | 1000 | 1100 | 1200 | ||
500V | 175 | 175 | 250 | 400 | 480 | 800 | 900 | 1000 | 1100 | 1200 | |||
660V | 85 | 85 | 120 | 180 | 200 | 400 | 500 | 630 | 640 | 700 | |||
Frékuénsi operasi | Kahirupan listrik | AC-4 | 300 | 300 | 300 | 150 | 150 | 150 | 150 | 150 | 150 | 150 | |
AC-3 | 2400 | 2400 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 600 | |||
Kahirupan mékanis (kali / h) | 3600 | ||||||||||||
Kahirupan listrik (10000 kali / h) | AC-4 | 20 | 20-15 | 20~7 | 15~7 | 15~7 | 10~7 | 7 | 7~6 | 7~5 | 7~5 | ||
AC-3 | 200 | 160 | |||||||||||
Kahirupan mékanis (10000 kali / h) | 2000 | 1000 | |||||||||||
Gulungan | Tegangan kakuatan kontrol dipeunteun Us (V) | AC 36, 48, 110, 220, 380, 415, 440, 660 | |||||||||||
Tarik-di tegangan 50/60HzV | (0.85-1.1)Urang | ||||||||||||
Tegangan ngaleupaskeun 50/60Hz V | (0.2~0.7)Urang | ||||||||||||
kakuatan coil | 50Hz | Tarik-in VA | 70 | 70 | 70 | 110 | 110 | 200 | 200 | 200 | 200 | 200 | |
Tahan VA | 8 | 8 | 8 | 11 | 11 | 20 | 20 | 20 | 20 | 20 | |||
60Hz | Tarik-in VA | 80 | 80 | 80 | 115 | 115 | 200 | 200 | 200 | 200 | 200 | ||
Tahan VA | 8 | 8 | 8 | 11 | 11 | 20 | 20 | 20 | 20 | 20 | |||
Daya W | 1.8-2.7 | 1.8-2.7 | 1.8-2.7 | 3~4 | 3~4 | 6~10 | 6~10 | 6~10 | 6~10 | 6~10 | |||
Kakuatan | Nyambungkeun | 0.8 | 0.6 | ||||||||||
faktor | Meupeuskeun | 0.3 | 0.3 | ||||||||||
Pull-in waktos ms | 12~22 | 15-24 | 20-26 | 20-35 | |||||||||
waktos release ms | 4~12 | 5~19 | 8~12 | 6~20 | |||||||||
Max.frékuénsi operasi | 3500 kali / jam | ||||||||||||
Terminal | popotongan | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | ||
Kawat fléksibel sareng terminal pencét tiis (mm2) | 2.5 | 2.5 | 4 | 4 | 6 | 10 | 16 6 | 16 6 | 50 25 | 50 25 | |||
Kawat fléksibel tanpa terminal pencét tiis (mm2) | 4 | 4 | 6 | 10 6 | 10 6 | 16 | 25 16 | 25 16 | 50 35 | 50 35 | |||
Kawat teuas tunggal | 4 | 4 | 6 | 6- | 10 | 10 | 25- | 25- | 50- | 50- | |||
Beurat (kg) | 0.32 | 0.32 | 0.35 | 0.49 | 0.55 | 1.07 | 1.07 | 1.10 | 1.44 | 1.44 | |||
Jenis sekering cocog | Modél | RDT16(NT) – 00 | |||||||||||
Arus dipeunteun (A) | 20 | 20 | 32 | 40 | 50 | 63 | 80 | 80 | 100 | 125 | |||
Kontak bantu | Bisa ditambahkeun jeung F4, LA2-D/LA3-D tipe kontak reureuh hawa |
Wangun jeung dimensi instalasi
Kaayaan operasi normal sareng kaayaan instalasi
1. Suhu ambient: + 5 ° C ~ + 40 ° C, hawa rata dina 24h teu ngaleuwihan + 35 ° C;
2. Luhurna: teu ngaleuwihan 2000m.
3. Kaayaan atmosfir: nalika suhu pangluhurna + 40 ° C, kalembaban rélatif henteu ngaleuwihan 50%;Éta tiasa ngijinkeun kalembaban anu kawilang luhur nalika aya dina suhu anu kawilang rendah, contona, ngahontal 90% nalika dina +20 ° C, éta kedah diukur nalika aya kondensasi anu kajantenan kusabab variasi suhu.
4. Kelas polusi: 3.
5. Kategori instalasi: III.
6. posisi Instalasi: gradién tina beungeut ningkatna kana beungeut nangtung teu ngaleuwihan ± 5 °
7. Dampak sareng geter: produk kedah dipasang sareng dianggo di tempat-tempat tanpa goyang, dampak sareng geter.
Modél No.
Parameter téknik utama
Parameter téknik utama kontaktor pikeun ningali tabel 1
Modél | CJX2-09 | CJX2-12 | CJX2-18 | CJX2-25 | CJX2-32 | CJX2-40 | CJX2-50 | CJX2-65 | CJX2-80 | CJX2-95 | |||
Tegangan insulasi dipeunteun V | 690 | ||||||||||||
Kontak utama | Arus pemanasan konvensional (≤40°C) A | 20 | 20 | 32 | 40 | 50 | 60 | 80 | 80 | 125 | 125 | ||
Arus dipeunteun (A) nalika di 380V | AC-3 | 9 | 12 | 18 | 25 | 32 | 40 | 50 | 65 | 80 | 95 | ||
AC-4 | 4 | 5 | 7 | 10 | 13 | 16 | 20 | 25 | 32 | 45 | |||
Kakuatan controllable motor fase tunggal kW | 110V | 0.4 | 0.5 | 0.75 | 1.1 | 1.5 | 1.5 | 2.2 | 3.7 | - | - | ||
220V | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 3.7 | 5.5 | - | - | - | |||
Kakuatan motor kandang bajing tilu fase anu tiasa dikontrol kW (nalika AC-3) | 220V | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 25 | ||
380V | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | |||
440V | 4 | 5.5 | 7.5 | 11 | 15 | 22 | 30 | 37 | 45 | 45 | |||
660V | 5.5 | 7.5 | 9 | 15 | 18.5 | 30 | 33 | 37 | 45 | 45 | |||
AC-1 (≤40°C) A | 20 | 20 | 32 | 40 | 50 | 60 | 80 | 80 | 125 | 125 | |||
Nyambungkeun max.ayeuna A | 250 | 250 | 300 | 450 | 550 | 800 | 900 | 1000 | 1100 | 1200 | |||
Megatkeun max.ayeuna A | 440V | 250 | 250 | 300 | 450 | 550 | 800 | 900 | 1000 | 1100 | 1200 | ||
500V | 175 | 175 | 250 | 400 | 480 | 800 | 900 | 1000 | 1100 | 1200 | |||
660V | 85 | 85 | 120 | 180 | 200 | 400 | 500 | 630 | 640 | 700 | |||
Frékuénsi operasi | Kahirupan listrik | AC-4 | 300 | 300 | 300 | 150 | 150 | 150 | 150 | 150 | 150 | 150 | |
AC-3 | 2400 | 2400 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 600 | |||
Kahirupan mékanis (kali / h) | 3600 | ||||||||||||
Kahirupan listrik (10000 kali / h) | AC-4 | 20 | 20-15 | 20~7 | 15~7 | 15~7 | 10~7 | 7 | 7~6 | 7~5 | 7~5 | ||
AC-3 | 200 | 160 | |||||||||||
Kahirupan mékanis (10000 kali / h) | 2000 | 1000 | |||||||||||
Gulungan | Tegangan kakuatan kontrol dipeunteun Us (V) | AC 36, 48, 110, 220, 380, 415, 440, 660 | |||||||||||
Tarik-di tegangan 50/60HzV | (0.85-1.1)Urang | ||||||||||||
Tegangan ngaleupaskeun 50/60Hz V | (0.2~0.7)Urang | ||||||||||||
kakuatan coil | 50Hz | Tarik-in VA | 70 | 70 | 70 | 110 | 110 | 200 | 200 | 200 | 200 | 200 | |
Tahan VA | 8 | 8 | 8 | 11 | 11 | 20 | 20 | 20 | 20 | 20 | |||
60Hz | Tarik-in VA | 80 | 80 | 80 | 115 | 115 | 200 | 200 | 200 | 200 | 200 | ||
Tahan VA | 8 | 8 | 8 | 11 | 11 | 20 | 20 | 20 | 20 | 20 | |||
Daya W | 1.8-2.7 | 1.8-2.7 | 1.8-2.7 | 3~4 | 3~4 | 6~10 | 6~10 | 6~10 | 6~10 | 6~10 | |||
Kakuatan | Nyambungkeun | 0.8 | 0.6 | ||||||||||
faktor | Meupeuskeun | 0.3 | 0.3 | ||||||||||
Pull-in waktos ms | 12~22 | 15-24 | 20-26 | 20-35 | |||||||||
waktos release ms | 4~12 | 5~19 | 8~12 | 6~20 | |||||||||
Max.frékuénsi operasi | 3500 kali / jam | ||||||||||||
Terminal | popotongan | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | 1 2 | ||
Kawat fléksibel sareng terminal pencét tiis (mm2) | 2.5 | 2.5 | 4 | 4 | 6 | 10 | 16 6 | 16 6 | 50 25 | 50 25 | |||
Kawat fléksibel tanpa terminal pencét tiis (mm2) | 4 | 4 | 6 | 10 6 | 10 6 | 16 | 25 16 | 25 16 | 50 35 | 50 35 | |||
Kawat teuas tunggal | 4 | 4 | 6 | 6- | 10 | 10 | 25- | 25- | 50- | 50- | |||
Beurat (kg) | 0.32 | 0.32 | 0.35 | 0.49 | 0.55 | 1.07 | 1.07 | 1.10 | 1.44 | 1.44 | |||
Jenis sekering cocog | Modél | RDT16(NT) – 00 | |||||||||||
Arus dipeunteun (A) | 20 | 20 | 32 | 40 | 50 | 63 | 80 | 80 | 100 | 125 | |||
Kontak bantu | Bisa ditambahkeun jeung F4, LA2-D/LA3-D tipe kontak reureuh hawa |
Wangun jeung dimensi instalasi